Products

Iron-titanium compound powder 808

XD-808 IRON OXIDE/TITANIUM DIOXIDE COMPOUND PIGMENT

  1. ANTI-RUST MECHANISM

After coating the surface of superfine powders and pigment with some kinds of organic accessory ingredient, then processing the high-temperature treatment, it will creat a compact coat outside the surface of the pigment which will help to prevent the steel from corrasion arosed by the H2O, oxygen and other gas after making into paint, also strength the adhesive force of the pigments with the steel surface, in the other hand the compound lead salt of the product can creat a compact passive film outside the steel to perform an excellent antirust effect.

  1. COMPONENT

Compound of a few metal salts and superfine compound powders whose surface has a high temperature coating process

  1. PERFORMANCE

1.Compared with RED LEAD,it has an outstanding decentralization and an obvious improvement in the stability, anti-deposition and antirust property after making into paint.

2.With a good cost performance and can cut your pice cost obviously compared with other traditional antirust materials.

3.Compared with RED LEAD and the compound one, it greatly decrease the content of heavy metal which make it an environmental product, also it can be spray painting and brush painting, so it is an easily used, ideal and bran-new antirust pigment.

  1. Application

Suitable for making water-based and oil-based coatings like surface one, priming one and surface&priming mixed paints. It can partially or totally replace the RED LEAD pigment.

  1. Technical Index

Item

Index

appearance

Orange Red(Yellow) powder

Residues(on 500 mesh sieve) ,%≤

1

Specific Gravity,(g/cm3,270C)

3.0~4.2

Soluble Matter in Water,g/100g≤

1

Oil Absorption, g/100g≤

13~28

Mater Volatile at 1050C,% ≤

1

PH Value of Water Slurry

7.0~9.5

Chromate(CrO42-)

30

Silicate(SiO2),% ≥

8
  1. Suggested dosages:

20%~40%(can be mixed with RED LEAD with a 1:1,1:2 or 1:3 proportion)

  1. Method of Application

General anti-rust coatings production process

  1. Packings

25kgs or 40kgs plastic bag inner and plastic woven bag outer

9.  Storage

Keep it in a dry and ventilated place

 

 

 

 

< Back >